Product Description and Application

• A LED bicycle tail light for use in combination with a (hub)-dynamo, specially designed for city, trekking and hybrid bikes.
• This light is designed for rear carrier application.

• With 1 red LED, a "light bar" for optimal visibility and a bright light distribution even to the sides
• Light is visible in a 220 degrees angle, which brings an optimal safety

Housing

• Rear part made of impact resistant ABS
• Front part made of a transparent PMMA
• Integrated red retro reflector
• Splash and rain water proof

Bolt distance

• 80 mm or 50 mm bolt distance for rear carrier mounting

Stainless steel fasteners

• 2 x bolts M5 x 10mm
• 2 x lock washers
• 2 x nuts M5
• 1 x Philips screw 3 x 12mm

Connection

• 2 x terminal lugs, including 2 x single plug, at the bottom side to connect at the front light or at the (hub)-dynamo

Values light performance

• The maximum value for the light performance of this rear light is 3.5 lumen

Retro Reflectors

• A retro-reflector is integrated in the light housing

Dimensions

• 109 x 43 x 19 mm (Width x Height x Thickness)

Weight

• 46 g

Standards

• Meet the CE standard

Installation & Maintenance:

• Check the proper function of your bicycle light before every ride

• This tail light is also available in a battery version. Check UNION-4450 for more information.