Product Description and Application

• A LED bicycle tail light for use in combination with a hub-dynamo or a side runner dynamo, specially designed for city, trekking and hybrid bikes.
• This light is designed for rear carrier application.

• With 3x LED red and a "light bar" for optimal visibility and a bright light distribution even to the sides
• Modern and innovative design
• Light is visible in a 220 degrees angle and above, which brings an optimal safety

Housing

• Rear part made of impact resistant ABS
• Front part made of a transparent PMMA, with an integrated, extra-large red retro reflector
• Splash and rain water proof, complete ultra-sonic welded

Bolt distance

• The bolt distance can be adjust, via an integrated slide system, from 80mm to 50mm

Stainless steel fasteners

• 2 x bolts M5 x 12mm
• 2 x washers
• 2 x lock nuts M5

Connection

• 1+1 terminal lugs at the bottom side for connection at the front light output or direct at the dynamo
• Cable can be connected with the plastic plugs (included) or with standard metal plugs (2.8 x 0.5mm)

Light performance

• The maximum value of the light performance of this tail light is 8.5 lumen

Retro Reflectors

• A large retro-reflector is integrated in the light housing

Dimensions

• 113 x 50 x 22 mm (Width x Height x Thickness)

Weight

• 61 g

Standards

• Meet the CE standard
• This complete light is approved according German "StVZO" (K 1237)
• The retro-reflector ("Z") meets German "StVZO" and is approved according ECE-R3 (IA-E1-024302)

Installation & Maintenance:

• Check the proper function of your bicycle light before every ride

• This tail light is also available in an (hub) dynamo version with a steady-light function, check UN-4365, a battery version ON/OFF, check UN-4460 and an automatic version with an AUTO/ON/OFF function, check UN-4465 for more information.